Custom Storage Solutions In Idalia

Custom Storage Solutions Experts

Made-to-measure kitchens, wardrobes and joinery built for the North Queensland climate, designed and installed by a local team with more than 12 years of hands-on experience across Townsville.

Storage is the quiet problem in most Townsville homes. Between the high-set timber Queenslanders of North Ward and Hyde Park, the post-war lowsets around Mundingburra and Currajong, and the new slab-on-ground estates out at Kirwan, Kelso and Deeragun, almost every floor plan hides awkward corners, dead voids and cupboards that never quite fit what you own. Townsville Custom Cabinets designs and builds fitted storage for the whole house: walk-in and reach-in robes, linen presses, scullery and pantry joinery, laundry and mudroom cabinetry, garage and workshop shelving, under-stair drawers and home-office wall units. Every piece is measured on site, drawn to your actual rooms and built in our workshop from moisture-resistant board chosen for the Dry Tropics. We are fully insured with $20 million public liability and have been fitting out North Queensland homes for more than 12 years. If you are tired of clutter with nowhere sensible to put it, call us on 0485 032 128 for a free measure and quote.

GET A FREE QUOTE

Full Name *

Phone *

Short message about your needs *

I agree to terms & conditions provided by the company. By providing my phone number, I agree to receive text messages from the business.

0485 032 128

Townsville Custom Cabinets

Storage solutions we design and build

Custom storage covers far more than a wardrobe. We build walk-in robe fit-outs with hanging rails, shelving towers, shoe racks and soft-close drawer banks, plus reach-in robes for smaller bedrooms where every centimetre counts. In hallways and bathrooms we build linen presses with adjustable shelves sized to towels, bedding and the bulky spare doonas that get swapped between the wet and dry seasons. Kitchens gain sculleries and butler's pantries with appliance nooks, deep pot drawers and floor-to-ceiling provisions storage. Laundries get overhead cupboards, broom towers, hidden hamper drawers and fold-down bench space, while mudrooms and back-entry drop zones give a family a place to dump bags, hats and boots. We also fit out garages and workshops with heavy-duty shelving and cabinets, build under-stair drawer systems that reclaim a dead triangle, and make home-office joinery with desks, filing and open display for the growing number of Townsville households working from home. Media walls, window seats with storage bases, and display cabinetry round out the range. Because everything is drawn to your rooms rather than pulled off a shelf, we can wrap storage around fuse boxes, air-conditioning heads, sloping Queenslander ceilings and the odd angles that off-the-shelf modules simply cannot follow. The brief always starts the same way: what do you own, where does it live now, and where should it live so the house feels calmer.

Townsville Custom Cabinets

Built for the Dry Tropics

Townsville sits in a rain shadow and is unusually dry for the tropics, yet the Bureau of Meteorology's Townsville Aero station still records roughly 1,100 millimetres of rain a year, with close to two-thirds of it dumped in the December to March wet season and January mean maximums around 31 degrees. That pattern of humid, storm-driven months followed by a mild dry winter is hard on cabinetry, and cyclone and monsoon events such as Cyclone Yasi in February 2011 and the February 2019 monsoon flood show how quickly moisture can get into a home. For that reason we build wet-area and coastal storage from 16 to 18 millimetre high-moisture-resistant (HMR) board, heat-seal the edge banding so humid air cannot creep into the substrate, and seal any cut-outs around plumbing in laundries and sculleries. Kickboards are ventilated where airflow matters and stored linen benefits from breathable shelf spacing. Carcasses are glued and dowelled and built dead square so they stay true through seasonal timber movement, which is especially important in older high-set Queenslanders where the whole structure flexes. Drawers run on full-extension runners rated around 40 kilograms, stepping up to 70-kilogram runners for heavy pot or tool drawers, and doors hang on soft-close hinges rated well past 100,000 open-close cycles with three-way adjustment so reveals stay within about two millimetres. Finishes are matched to the job: hard-wearing melamine and high-pressure laminate for garages and laundries, timber veneer or two-pac polyurethane for display pieces, with vinyl-wrap used cautiously and kept away from heat sources. Honest note: moisture-resistant board resists humidity, it is not waterproof, so we detail around water rather than relying on the board alone.

Townsville Custom Cabinets

Why Townsville homeowners choose us

We have spent more than 12 years building cabinetry across North Queensland, we carry $20 million in public liability insurance, and we treat storage as a design problem rather than a box-fitting exercise. Townsville is a garrison and university city, and that shapes the work. Lavarack Barracks and RAAF Base Townsville mean a large Defence population moving in and out on postings, so we regularly fit out rentals and family homes to a tight timeline for people who need quick, quality turnarounds before or after a relocation. James Cook University at Douglas, founded in 1970, and the nearby Townsville University Hospital bring students, staff and health workers who want practical storage that maximises small Douglas and Annandale dwellings. The demographics vary suburb by suburb, and we quote accordingly. In value-conscious rental belts such as Aitkenvale, Cranbrook and Kelso we lean on durable melamine and smart layouts that add function without blowing the budget. In higher-value character streets around Hyde Park and North Ward, owners of restored Queenslanders want joinery that respects VJ walls and high ceilings, so we scribe carefully and match trims. In family estates like Deeragun, Mount Louisa and Kirwan the demand is for whole-house storage that keeps a busy household organised. Wherever you are, you deal with the person who measures and builds your job, not a call centre, and the quote you approve is the price you pay.

Townsville Custom Cabinets

What custom storage costs in Townsville

Prices vary with size, materials and complexity, so treat these as indicative ranges rather than fixed quotes. A straightforward linen press or a run of laundry cupboards typically lands somewhere around $1,200 to $2,800 supplied and installed. A reach-in robe fit-out with shelving and a drawer bank often sits in the $1,500 to $3,500 band, while a full walk-in robe with hanging towers, drawers, shoe racks and shelving commonly runs from about $3,000 to $8,000 depending on size and finish. Garage and workshop storage packages with heavy shelving and cabinets generally range from $2,500 to $6,000, and a home-office fit-out with desk, filing and display usually falls between $2,500 and $6,500. Under-stair drawer systems and window-seat storage are priced on the void but often begin around $1,800. Choice of finish moves the number: melamine is the workhorse and keeps costs down, high-pressure laminate adds durability for a modest lift, and timber veneer or a two-pac polyurethane finish sits at the premium end. Soft-close hardware from Blum or Hettich, heavy-duty runners and full-height doors all add to the total but are exactly where quality shows over a decade of daily use. We give you an itemised written quote after measuring, so you can see where the money goes and trim the scope if you want to stage the work across a couple of visits.

Townsville Custom Cabinets

Custom storage versus flat-pack

Townsville has no IKEA. The nearest store is at North Lakes on Brisbane's northern edge, roughly 1,300 kilometres away by road, which means a flat-pack robe or storage system bought there arrives as a courier consignment with no local support if a panel is damaged or a part is missing. Bunnings Kaboodle is stocked locally and works for simple, square cupboards, but flat-pack lives and dies on fixed module sizes. Storage is where those fixed sizes hurt most, because the spaces that need storage are almost never standard: the sloping void under a Queenslander stair, the odd nook beside a chimney breast, the shallow hallway that only a 320-millimetre-deep press will suit, or the wall interrupted by an air-conditioning head. Bolt standard boxes into a non-standard space and you are left with filler panels, wasted gaps and shelving that stops short of the ceiling. Custom joinery starts from your dimensions, so a cabinet can be 2,640 millimetres tall to meet a raked ceiling, scribed hard against an out-of-square wall, and detailed to swallow the exact things you store. You also get better hardware as standard, proper edge sealing for the humid months, and an installer who levels and packs the unit on site. Flat-pack can be the right call for a quick rental patch-up, and we will tell you when it is. When storage needs to fit the house rather than the other way around, custom is the difference between clutter hidden and clutter simply moved. Townsville Custom Cabinets is fully insured and just a call away on +61485032128 for a free quote.

Related Concreting Services

Built-in Wardrobes in Idalia

Made-to-measure built-in wardrobes that fill your wall and organise the whole room. Adjustable shelving, quality soft-close hardware and finishes to match your home, scribed to fit even an out-of-square Queenslander. Built locally in Townsville, fully insured, with a free design consult.

Shopfitting & Commercial Joinery in Idalia

Shop counters, cafe fit-outs, reception desks, office and medical joinery for Townsville businesses. Built from commercial-grade materials for heavy daily use and the tropical climate, measured to your lease space and installed to schedule. Fully insured, locally made, trade-friendly.

Custom Kitchens in Idalia

Bespoke kitchens engineered for North Queensland living. Moisture-resistant cabinetry, sealed cut-outs and soft-close German hardware, made to measure for your Townsville home and installed by a local team with a dozen years on the tools. Free design consultation and quote provided.

TESTIMONIALS

What Our Custom Storage Solutions Customers Say About Us

The Process

3 Step Process For Your Custom Storage Solutions Needs

Free Measure and Consultation

It starts with a free, no-obligation visit anywhere across the Townsville region. We take proper on-site measurements, look at how your space is built (square new estate or out-of-plumb Queenslander), and talk through what you want, how you use the room, and your budget. You get honest advice from the maker, not a salesperson, including straight talk about what suits our climate. Ring 0485 032 128 to book.

Design, Quote and Material Selection

We turn the measure into a design and a firm written quote, with no surprises. Together we choose the layout, door style, finishes and benchtop (laminate, natural stone, porcelain or timber, never engineered stone), and the hardware, so you know exactly what you are getting and what it costs before anything is built. We refine the design until it is right for your home and your budget.

Manufacture and Installation

Once you sign off, we manufacture your cabinetry, building carcasses in moisture-resistant HMR board, glued and dowelled square, with sealed edges and quality soft-close hardware. On install day we scribe to your walls and pack everything dead level, setting reveals to within about 2mm, then seal cut-outs and finish neatly. You are left with cabinetry made to measure and built to last in the Townsville climate.

Custom Storage Solutions In Idalia

FREQUENTLY ASKED QUESTIONS

Everything you need to know about our Custom Storage Solutions In Idalia

Do you build storage for garages and sheds, not just bedrooms?

Yes. Alongside robes, linen presses and home offices, we regularly fit out garages, sheds and workshops with heavy-duty shelving, tall cupboards and drawer banks. For these areas we use hard-wearing melamine or high-pressure laminate over 16 to 18 millimetre board, and we can rate drawers up to 70 kilograms for heavy tools and equipment. It is a practical way to get gear off the floor and free up a bay.

Can custom storage fit an old high-set Queenslander with uneven walls?

That is exactly where custom earns its keep. Older high-set homes in suburbs like North Ward, Hyde Park and Mundingburra are rarely square, and the timber moves with the seasons. We measure on site, build the carcasses dead square in the workshop, then scribe and pack the units level on installation so reveals stay tight, within about two millimetres. Flat-pack modules cannot follow those out-of-square walls without ugly gaps.

How do you stop stored items getting damp in the wet season?

We build wet-area and coastal storage from moisture-resistant HMR board, heat-seal all edges so humid air cannot get into the substrate, and space shelving to let air move around linen and stored goods. Ventilated kickboards help where airflow matters. Being honest, moisture-resistant board is not waterproof, so the real protection comes from good detailing, sealed cut-outs and keeping storage off damp floors, which we design for from the start.

I am posted to Townsville with Defence and need storage sorted quickly. Can you help?

Yes, and we do it often. With Lavarack Barracks and RAAF Base Townsville nearby, we are used to working to relocation timelines, both fitting out a new home and tidying up storage before a posting ends. Tell us your dates when we measure and we will give you a realistic build-and-install schedule so the joinery is ready when you need it, without cutting corners on quality.

What does a walk-in robe fit-out usually cost?

As an indicative range, a full walk-in robe fit-out with hanging towers, drawers, shoe storage and shelving generally runs from about $3,000 to $8,000 supplied and installed, depending on size, layout and finish. A simpler reach-in robe often sits between $1,500 and $3,500. We provide an itemised written quote after measuring so you can see the cost of each element and adjust the scope to suit your budget.

Do you use soft-close drawers and quality hardware in storage units?

Yes, as standard. Drawers run on full-extension runners rated around 40 kilograms, stepping up to 70 kilograms for heavy loads, and doors hang on soft-close hinges rated past 100,000 open-close cycles with three-way adjustment. We fit quality Blum or Hettich hardware because storage gets opened and closed every day for years, and cheap runners and hinges are the first thing to fail in the local humidity.